如今隨著智能化、自動化技術、電子信息技術、機械結構設計技術性的發展趨勢，及其我們對設備的品質規定的提升，焊接品質、美觀大方度等獲得了很大的高度重視。下面山東焊接專機廠家來講講自動焊接專機日常保養八大事項。

Nowadays, with the development trend of intelligence, automation technology, electronic information technology, and the technicality of mechanical structure design, as well as the improvement of our quality requirements for equipment, welding quality and aesthetics have been highly valued. Next, Shandong welding machine manufacturers will talk about the eight items of daily maintenance of automatic welding machines.

1.焊接操作機中傳動鏈條為零配件，每一年需拆下來查驗一次，妥善處理。

1. The drive chain in the welding operation machine is a spare part, which needs to be removed for inspection every year and properly handled.

2.各限位開關的姿勢協調能力、穩定性要時常查驗，以防有松脫、毀壞。

2. The posture coordination ability and stability of each limit switch shall be checked frequently to prevent loosening and damage.

3.電源電路連接頭要時常查驗，維持聯接堅固，接插靠譜。

3. The power circuit connector should be checked frequently to ensure that the connection is firm and reliable.

4.工作平臺控制板及手操器內的灰塵要三個月一次用空氣壓縮吹。

4. The dust in the control board of the working platform and the manual operator should be compressed and blown once every three months.

5.電器、旋紐、電源開關要時常查驗，保持干凈和較好的觸碰，以防錯誤操作。

5. Electrical appliances, knobs and power switches shall be inspected frequently, kept clean and well touched to prevent wrong operation.

6.各滑軌、滑架、滾珠絲杠及螺帽等運動部位常常檢測處理，避免灰塵沉積而危害運動部位的靈便運動。

6. The moving parts such as sliding rails, carriages, ball screws and nuts are often detected and treated to avoid dust deposition and endangering the convenient movement of the moving parts.

7.各滾動直線導軌的接觸面不允許撞擊、損壞。滾珠絲杠、蝸桿等重要運動構件要時常查驗防止損壞狀況。

7. The contact surface of each rolling linear guide shall not be impacted or damaged. Ball screw, worm and other important moving components should be inspected frequently to prevent damage.

8.自動焊接焊接操作機各運動部位、滑軌與滾軸該涂潤滑油脂，閉試傳動系統部位應注潤滑脂，以維持構件運動靈便；關鍵是對平心輪、齒條構件的維護保養，確保其擰緊，保證橫臂運動豎直。

8. All moving parts, sliding rails and rollers of the automatic welding and welding operator shall be coated with lubricating grease, and the transmission system of the closed test shall be filled with lubricating grease to maintain the flexibility of component movement; The key is to maintain the flat wheel and rack components, ensure that they are tightened, and ensure that the cross arm moves vertically.

本公司為客戶供應從焊接、切割、除塵及相關輔件等全流程的產品，公司配備一支經驗豐富的技術團隊，為您提供焊接設備，切割設備的售前售中售后服務。您有需求就來我們網站http://www.haohuoxian.com聯系咨詢吧！

The company provides customers with products from welding, cutting, dust removal and related accessories. The company is equipped with an experienced technical team to provide you with pre-sale, mid-sale and after-sales services of welding equipment and cutting equipment. If you have any need, please come to our website http://www.haohuoxian.com Contact us!