Welding robot can be changed according to different cutting requirements when it is used. It has strong applicability and can improve the accuracy of welding when it is used. Its automatic processing method can ensure good welding effect and save some labor. It has great advantages and is welcomed by many enterprises, So what advantages can robots create for factories when they are in use? Let's have a look.

一、機器人焊接可以提高生產效率焊接機器人的響應時間短，動作快，焊接速度為60~120cm/min，該速度遠遠高于手工焊接(40~60cm/min)機器人在運轉中不停止休息。

1、 Robot welding can improve the production efficiency. The response time of welding robot is short and the action is fast. The welding speed is 60 ~ 120cm / min, which is much higher than that of manual welding (40 ~ 60cm / min). The robot does not stop resting during operation.

二、機器人焊接在能提高產品質量的機器人焊接過程中，只要給出焊接參數和運動軌跡，機器人就能正確地重復該動作，焊接電流、電壓、焊接速度及焊接干伸長等焊接參數不能焊接另一方面，人工焊接的情況下，由于焊接速度、干伸長等發生變化，所以很難達到質量的均勻性，保證了產品的質量。

2、 Robot welding in the process of robot welding which can improve the quality of products, as long as the welding parameters and trajectory are given, the robot can correctly repeat the action. The welding parameters such as welding current, voltage, welding speed and welding dry elongation can not be welded. On the other hand, in the case of manual welding, due to the change of welding speed and dry elongation, etc, So it is difficult to achieve the uniformity of quality and ensure the quality of products.

三、機器人焊接可以降低企業成本，機器人企業成本主要出現在規模化生產中，一臺機器人可以代替2到4名產業工人，根據企業情況，機器人沒有疲勞，可以連續生產24小時。

3、 Robot welding can reduce the cost of enterprises. The cost of robot enterprises mainly appears in large-scale production. A robot can replace two to four industrial workers. According to the situation of enterprises, the robot is not tired and can produce 24 hours a day continuously.

四、機器人焊接容易安排生產計劃。機器人重 現性高，只要給出參數就總是指現在的動作，因此機器人焊接產品的周期明確，生產量容易控制，機器人的生產節拍固定，因此安排生產計劃非常明確，正確的生產計劃是企業的生產效率、資源的綜合利用做到較大化。

4、 Robot welding is easy to arrange production plan. The robot has high reproducibility. As long as the parameters are given, it always refers to the current action. Therefore, the cycle of robot welding products is clear, the production quantity is easy to control, and the production rhythm of robot is fixed. Therefore, the production plan is very clear. The correct production plan is to maximize the production efficiency and the comprehensive utilization of resources.

五、機器人焊接可以縮短產品更新周期和相應的設備投資，實現少量產品的焊接自動化。機器人和專機的區別是他能修改程序支持不同的工件生產。產品更新時只需根據新的依據進行更新產品。

5、 Robot welding can shorten the product update cycle and the corresponding equipment investment, and realize the welding automation of a small number of products. The difference between a robot and a special machine is that it can modify the program to support the production of different workpieces. When the product is updated, it only needs to update the product according to the new basis.

以上就是焊接機器人在使用時能為工廠創造的一些優勢，在使用時能夠提高工廠生產的效率，在使用時還能根據不同的情況進行及時的調整具有較強的適用性，在后期的使用中還能節省部分人工的使用，能為工程創造一定的經濟效益。

The above is the welding robot in use can create some advantages for the factory, in use can improve the efficiency of factory production, in use can be adjusted in time according to different situations, has strong applicability, in the later use can also save part of the manual use, can create certain economic benefits for the project.