Welding is a very important process in the winding processing of motor products. Welding is a very important link whether it is formed winding or embedded winding, whether it is the connection between winding and lead wire, or the connection between this line in winding. It can be found in the process of fault motor analysis and treatment that there are many electrical faults caused by poor welding quality.

不同的電機生產企業，對于該環節的處理工藝不盡相同，但處理的原理大致相同，即先將電磁線的本身的絕緣層進行清理，無論是漆包線還是繞包線，該環節都是比較麻煩的，特別是對于多匝并繞的情況，電磁比本身絕緣的清理特別困難，有的廠家采用刮刀，有的廠家采用化學方式，但無論那種，效率都是非常低下的，更為嚴重的是，當電磁線絕緣層處理不徹底時，焊接的效果較差，半成品檢查及電機出廠試驗時不一定能暴露出問題，電機運行過程中較容易出現故障。

Different motor manufacturers have different treatment processes for this link, but the treatment principle is roughly the same, that is, clean the insulation layer of the electromagnetic wire first. Whether it is enamelled wire or wrapped wire, this link is more troublesome, especially for the case of multiple turns and winding, the cleaning of the electromagnetic insulation is particularly difficult. Some manufacturers use scrapers, Some manufacturers use chemical methods, but no matter which kind, the efficiency is very low. What's more serious is that when the insulation layer of electromagnetic wire is not completely treated, the welding effect is poor, the problems may not be exposed during semi-finished product inspection and motor factory test, and the motor is prone to failure during operation.

針對該問題，的焊接設備應運而生，該設備焊接過程中，采用高溫加熱的方式清理掉電磁線上的絕緣層，并采用熱熔方式實現，將被焊接對象熔為一體，是一種非常和可靠的焊接方式。大多數自動焊設備應用了逆變電源技術及微電子控制技術，具有控制精確、工藝適應性廣且、、穩定、操作簡便等諸多優點。

To solve this problem, professional welding equipment came into being. In the welding process of the equipment, the insulating layer on the electromagnetic line is cleaned by high-temperature heating, and the hot melting method is adopted to melt the welded object into one. It is a very efficient and reliable welding method. Most automatic welding equipment applies inverter technology and microelectronic control technology, which has many advantages, such as accurate control, wide process adaptability, energy saving, high efficiency, stability, simple operation and so on.

以上內容就是關于山東自動焊接設備http://www.haohuoxian.com/的介紹，希望這些內容對大家有所幫助。如果您還有什么疑問,或者想要了解更多資訊歡迎咨詢我們官網。我們將竭誠為您服務。

The above content is about Shandong automatic welding equipment http://www.haohuoxian.com/ I hope these contents will be helpful to you. If you have any questions or want more information, please consult our official website. We will serve you wholeheartedly.